T100 PRO OBD II Scanner

A versatile scanner that combines OBD II scanning with battery diagnostics functions. This 2-in-1 diagnostic tool provides comprehensive vehicle health monitoring and battery system analysis in a single compact device.

Key Functions

• Replay Function– Review previously recorded diagnostic data
• Read Fault Code– Retrieve stored, pending, and permanent DTCs
• Clear Fault Code– Erase trouble codes and reset engine fault light
• Read Vehicle Information– Automatic scanning, no need to manually select brand and model
• Read Data Stream– Monitor live sensor data in real time
• Battery Diagnosis– Detect battery health status and charging system condition
• Freeze Frame– Capture sensor data at the moment a fault is detected
• I/M Ready– Check emission system readiness status
• Oxygen Sensor– Test oxygen sensor performance
• Mode 6– In-vehicle monitoring test for specific component tests
• Mode 8– Control of on-board system, test, or component
• Cloud Printing– Scan QR code to view test data on phone, save as PDF and share
• DTC Lookup– Look up fault code definitions
• Vehicle Year Identification– Quickly identify vehicle production year via VIN
• Startup Test– Evaluate battery performance during engine cranking
• Charging Test– Verify alternator and charging system operation
• Vol Waveform Monitoring– Monitor voltage waveform patterns

Intelligent Matching

Compatible with 97% of OBD II compliant vehicles. Supports up to 9 different communication protocols for broad vehicle coverage across multiple brands:

1. ISO9141-2 (5 baud init, 10.4 Kbaud)
2. SAE J1850 PWM (41.6 Kbaud)
3. SAE J1850 VPW (10.4 Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11 bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29 bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11 bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29 bit ID, 250 Kbaud)

Clear Fault Light

Quickly read vehicle faults and clear the engine fault light. Reads stored DTCs with full code descriptions (e.g., P0120 – Throttle/pedal position sensor/switch A circuit) and allows erasing trouble codes with confirmation.

I/M Readiness Test

Used to check the operation of the emission system on vehicles that comply with OBD II. Accessible via the dedicated side I/M shortcut key. Displays readiness status for MIL, MIS, FUEL, CCM, CAT, HCAT, EVAP, and other monitors for both "Since DTCs cleared" and "This driving cycle" conditions.

Read Vehicle Information

Automatic scanning of connections eliminates the need to manually select brand and model. Reads Vehicle ID number (VIN), Calibration ID, Calibration Verification Number, In-use Perform Track, and ECU name.

In-Vehicle Monitoring Test (Mode 6)

After repair or clearing of fault codes, the vehicle monitor test allows access to specific component tests. The vehicle manufacturer assigns MID and CID values used to test different systems and components, including oxygen sensor monitors and test data values with min/max limits and status.

Battery Diagnosis

Detects the health status of the vehicle's battery and the working condition of the charging system to help judge battery service life and ensure safety.

• Charging Test: Shows load voltage, no-load voltage, and voltage fluctuation
• Startup Test: Displays battery voltage and minimum voltage during cranking with waveform graph

Vehicle Year Inquiry

Quickly identifies the production year of the vehicle from the VIN number to help maintenance personnel accurately match parts and perform the correct diagnostic procedures.

Support Software Upgrade

The upgrade program can be downloaded from the PC, and the device can be upgraded through the Type-C connection.

Cloud Printing

Scan the QR code with your phone to view test data, then tap the PDF icon to save results and print or send to a professional repairman. Supports print data and delete data options.

Support Multiple Languages

Interface available in 14 languages: English, Chinese, Spanish, French, Italian, Russian, Portuguese, German, Polish, Dutch, Japanese, Indonesian, Turkish, and Thai.

Product Parameters

Hardware Components

• 2.4-inch TFT LCD Color Screen
• I/M Shortcut Key
• LED Indicator (Pass/Warning/Fail)
• ESC Key
• OK Key
• Arrow Keys (Up/Down)
• OBD II Connector
• TYPE-C Port (for software upgrades)